Call: +86 182 539 77770    +86 539 8191393

Home > Products> MGO board production line >

PRODUCT DESCRIPTION

Tube Brief Introduction of Production Line

The production line is used to produce magnesium oxide board (fireproof board) for building materials, and now automation level is the highest in China. MgO board equipment adopts double drive double-roll extrusion process. The whole production process is as following: 1.Dosing     2.forming     3.Curing     4.Cutting & Sanding     5.Packaging & storage The production line is high automation, stable operation, specifications can be adjusted as you like. Product surface is smooth and flat, high compactness, truly realized the industrialization of the new decoration panel production line. Its finished product MgO board is the best alternative for those traditional products like Gypsum board, fiber cement board, Calcium silicate board, etc. Now the MgO board market share is increasing by 15% year by year. Mgo board is the totally environmental friendly product, could meet the whole trend around the world.


Main Parameters

  • Production Capacity

    4000 sheets /shift/10hours. (Basis of calculation: L: 2440mm , W: 1220mm , T: 8mm)

  • Plant Area

    《7000SQM，It will be better for 10000sqm/year》 If your land area less than 7000SQM , Our engineer can design based on your land area.

  • Configuration

    High Automatic / Semi-automatic

  • Famous Brand Used

    German Rittal , SIEMENS , Schneider

  • MGO Board Size

    Length:2400、2440、2700、3000mm (adjustable) Width:1200、1220mm（standard width） Thickness:3-25mm

  • MGO Board Type

    Common MgO board , Sanding MgO board , MGO Sulfate Board

  • Board Application

    Interior/exterior wall , floor , ceiling , etc

  • High Light Advantages

    A1 fireproof No harmful substance High bending strength Easy installation Morden and popular building material

SEE HOW IT WORKS

Push the “PLAY” button and see the video

The Main Advantage Of The Production Line Equipment

Sanded System

Two sets sanding machines， one is for primary sanding ，the other is precise sanding. In order to make the surface of the board more smooth and even. Can control the thickness tolerance very small.
Sanded System
Mold Releasing System Of Formed Sheets

Mold Releasing System Of Formed Sheets

Automatic release the board from PVC mold ,and automatic stack the PVC molds , Regards the board ,when we stack the boards, we need to stack with face to face. because if the face to backside, it is easy to scratch the face side. The automatic flip machine makes this part automatic, no need workers do it. 1.A radian between the conveyor belt and output machine can help to make the Mgo board and PVC mold  to separate more easily . Or else , the Sucker will easy suck the PVC mold and MgO board together . 2.The blowers on the convey line ,can blow the dust on the board and PVC mold . 3.The use of the flip machine and the suction cup machine saves labor.

Four-edge Cutting Machine

Cutting the formed board edges, making edge smooth and tidy, reducing error, so as to make the board beautiful. Precise cutting machine, could cut any special size board, esp for the laminated boards could guarantee the four sides very smooth after cutting.
Four-edge Cutting Machine
Multifunctional Forming System

Multifunctional Forming System

This part includes all configuration of automatic feeding slurry, automatic laying cloth, automatic flatting, 5groups of roller, second-pressing. The production line is high automation, stable operation, specifications can be adjusted as you like. Product surface is smooth and flat, high compactness, truly realized the industrialization of the new decoration panel production line.

Automatic Cutting Machine

The production speed is determined by the linear cutting speed. With the new equipment, we have updated the cutting technology, and the production capacity of the same thickness has been increased. Equipment function and characteristics: Exactly cutting the board into designated specification during production flow , no damage to the products and molds, reducing labor cost and lower working strength.
Automatic Cutting Machine
Raw Material Mixing System

Raw Material Mixing System

1.Double Shaft mixer adopting of most advanced, the most mature mixing mechanism and its core technology, and high speed rotating cutter discrete type mixer, fast mixing speed, shows high mixing efficiency of the mixer host. 2.High mixing precision, good workability and evenness of various kinds of materials 3.Pneumatic discharge device. When discharging, there is no dead zone, no residue, no leakage, and discharge time is short. 4.To adjust the mixing time of mixing console according to the testing of the product, and with the highest productivity to meet the requirements of production. 5.Mixing barrel and mixing blade are made of imported alloy wear-resistant plate, high-speed flying cutter is made of wear-resistant alloy castings and has high wear resistance, can improve the service life of the mixing console.

Production Line Advantage

1.Our mgo board machines are high configuration with low maintain rate and long service life.   2.Capacity: Could produce up to 4000 pieces in 10 hours, higher than the industry standard in this filed.   3.The whole machine uses stainless steel beam bridge to improve the synchronous running stability of the mold.   4.The production line can produce both MgO board and fiber cement board .Double use to meet market very well.   5.We have a short machine testing time 10-15days to help you save raw materials cost.   6.Our own MgO board production factory can guarantee you qualified formula and production experience.
Production Line Advantage
Powder Conveying System

Powder Conveying System

Automatic material feeding -metering system Raw material of MgO powder ,MgO sulfate are feeding-metering-mixing automatically .scientific ratio and accurate weight measurement promise the stable formula; Beside the silo, there are dust collector, which can keep the factory very clear As saw dust perlite ,these material is light and easy block ,normally will be added by workers into the mixers.

Popular Product Specifications

Specification 3-5 series 6 series 7-11 series 12 series 13-25 series
Thickness (mm) 3-5 6 7-11 12 13-25
Length (mm) 2440;≤3050 2440;≤3050 2440;≤3050 2440;≤3050 2440;≤3050
Width (mm) 1220 1220 1220 1220 1220
Density(kg/m³) 1000-1100 1000-1100 1000-1100 1000-1100 1000-1100
Fire endurance(h) 60minutes 154 minutes

Sample Display More >>

Product ApplicationMore >>

What else do you want to know ? Contact us right now!

  • NAME*
  • E-MAIL
  • Phone Number*
  • Company
  • Message*
SEND

Related products

CONTACT US

Feedback your needs to us and contact you as soon as possible.

Contact Us

Address:No. 10, Industrial Park, Jiyang Street, Jiyang county, Jinan city, Shandong, China

phone:+86 182 539 77770

telephone:+86 539 8191393

e-mail:info@sinoyurui.com

PRODUCTS

—— EPS lightweight concrete wall panel machine —— MGO board production line

SUPPORT

—— FAQ —— After Sale Services —— Download —— Sitemap —— Private Policy

Copyright ® 2019 OYADE (Shandong) Machinery Equipment Co., Ltd.

Technical support： 标梵互动BIAOFUN